Has anyone had success triggering the LA2455 using the Yongnuo 622N trigegrs - and especially via the 622N-TX commander unit.
I've set it up to trigger my 3 flashes: Nikon SB900, SB800 & SB700 (I know.. but that is just what I bought) It works fine: all three fire, when I use the Tri Sync's optical slave via commander mode on my D750..
However.. when I try and trigger them using a Yongnuo YN-622N trigger connected via their supplied cable as shown in their notes.. only the SB800 flashes (regardless of which of the 3 hotshoe plates I position it in)
All three are set to TTL If I set all 3 to manual - they will all flash.. but what is the point of that.. I could have got a coldshoe mount..
My thoughts are it doesn't work with them.. as I've run out of tests & combo's to try.